Pump or gravity fed 5 bay filter system and combined vortex designed for koi ponds up to 3000 gallons.
A six stage filter designed for use on koi ponds. Made from high quality GRP fibre glass. Consisting of 1st stage vortex chamber, 2nd stage brush chamber, 3rd stage bio flow plastic media chamber, 4th stage matting cartridge chamber, 5th stage bio flow plastic media chamber, 6th stage bio flow plastic media and three layer filter foam set chamber. In each of the filter bays the filter media is supported by a grid which leaves a settlement space for all of the worst of the detrius that will accumulate in any pond filter. This detrius can easily be purged away via the fitted discharge valves. The filter comes with four 1 1/2" discharge valves for easy cleaning. On pump fed models the inlet is 1 1/2", the oulets are two 2" as standard. On gravity fed models the inlet is 4", the outlet is 1 1/2" as standard. In our experience any vortex filter will work more efficiently on gravity fed systems than pump fed systems due to the pressure of the water comming into the vortex from your pond. On pump fed systems the vortex can spin to quickly, thus reducing its efficiency. Please note these filters are manufactured by Manor koi so there is always a degree of flexibility regarding positions and sizes of inlets, outlets, and discharges. Please do not hesitate to contact us if you require further information.
Filter dimensions.
2210mm long.
620mm wide.
720mm high.
