Pump or gravity fed 6 bay filter system and combined vortex for koi ponds up to 3500 gallons.
A seven stage filter designed for use on koi ponds. Made from high quality GRP fibre glass for the professional koi keeper. Consisting of 1st stage vortex chamber, 2nd stage brush chamber, 3rd stage bio flow plastic media chamber, 4th stage matting cartridge chamber, 5th stage bio flow plastic media chamber, 6th stage matting cartridge chamber, 7th stage bio flow plastic media and three layer filter foam set chamber. In each of the filter bays the media is supported by a grid which leaves a v shaped settlement space for all of the worst of the detrius that will accumulate in any pond filter. This detrius can easily be purged away via the fitted discharge valves. The filter comes with five 1 1/2" discharge valves for easy cleaning. On pump fed models the inlet is 1 1/2", the outlets are two 2" as standard. On gravity fed models the inlet is 4", the oulet is 1 1/2" as standard. In our experience any vortex filter will work more efficiently on gravity fed systems than pump fed systems due to the pressure of the water comming into the vortex from your pond. On pump fed systems the vortex can spin to quickly, thus reducing its efficiency. Please note these filters are manufactured by Manor koi so there is always a degree of flexibility regarding the position and sizes of inlets, outlets and discharges. Please do not hesitate to contact us if you requrire more information.
Filter dimensions.
2520mm long.
620mm wide.
720mm high.
